Replacement Shaver
Trimmer Clipper Battery For Most Braun Philips Panasonic Wahl
USD $6.96
Condition : New
Free Shipping
{{variant_type_name}} :
Notify me when the price drops
We will email you if we find a lower price on this product!
Replacement Shaver Batteries
You are looking at our range of rechargeable batteries and battery packs to fit various Braun, Philips Philishave, Norelco, Panasonic, Wahl, Remington and other manufacturers' electric shavers, clippers and trimmers.
The side-by-side battery packs are permanently glued together then joined electrically across one end with a metal connector strip as shown below:
Correct polarity (+/-) must be observed. The solder tags on the side-by-side packs can be folded back on themselves to stick out in the opposite direction to maintain correct polarity if required for your shaver.
Please see below for a description of each battery. 42mm x 10mm NiMH42mm long, 10mm diameter NiMH 1.2V Rechargeable battery by GP Batteries
Industrial-grade reliability from GP Batteries
Highest 800mAh capacity for longest run-time before it needs recharging
Solder tags - Both ends
42mm x 10mm NiMH Pack 42mm long, 10mm high, 20mm wide NiMH 2.4V Rechargeable battery pack
Industrial-grade reliability - Made from two GP Batteries NiMH cells
Highest 800mAh capacity for long run-time before it needs recharging
Solder tags - Both at one end. Cells joined at other end.
42mm x 14mm NiMH 42mm long, 14mm diameter NiMH 1.2V Rechargeable battery by ESP Batteries
Great reliability from ESP Batteries
High 1200mAh capacity for long run-time before it needs recharging
Solder tags - Both ends
Not suitable for replacing 3.7V Lithium-ion (Li-ion) batteries. See our separate listing for .
42mm x 14mm NiMH Pack 42mm long, 14mm high, 28mm wide NiMH 2.4V Rechargeable battery pack
Made from two ESP Batteries NiMH cells
High 1200mAh capacity for long run-time before it needs recharging
Solder tags - Both at one end. Cells joined at other end.
49mm x 14mm Untagged 49mm long, 14mm diameter NiMH 1.2V Rechargeable battery by GP Batteries
Industrial-grade reliability from GP Batteries
Highest 2200mAh capacity for longest run-time before it needs recharging
No solder tags
Flat terminals
Not suitable for replacing 3.7V Lithium-ion (Li-ion) batteries. See our separate listing for .
49mm x 14mm With Tags 49mm long, 14mm diameter NiMH 1.2V Rechargeable battery by GP Batteries
Industrial-grade reliability from GP Batteries
Highest 2200mAh capacity for longest run-time before it needs recharging
Solder tags at both ends
Not suitable for replacing 3.7V Lithium-ion (Li-ion) batteries. See our separate listing for .
49mm x 14mm With Studs 49mm long, 14mm diameter NiMH 1.2V Rechargeable battery by FDK
Original specification battery as fitted by Braun and Panasonic
Studs at both ends for connection (pins/nipples/pips)
Length excluding studs: 49mm
Length including studs: 54mm
Not suitable for replacing 3.7V Lithium-ion (Li-ion) batteries. See our separate listing for .
49mm x 14mm NiMH Pack 49mm long, 14mm high, 28mm wide NiMH 2.4V Rechargeable battery pack
Industrial-grade reliability - Made from two ESP Batteries NiMH cells
High 2000mAh capacity for long run-time before it needs recharging
Solder tags - Both at one end. Cells joined at other end.
49mm x 14mm NiCd 49mm long, 14mm diameter NiCd 1.2V Rechargeable battery
Industrial-grade reliability from Yuasa
Highest 700mAh capacity for long run-time before it needs recharging
Solder tags at both ends
Not suitable for replacing 3.7V Lithium-ion (Li-ion) batteries. See our separate listing for .
49mm x 14mm NiCd Pack 49mm long, 14mm high, 28mm wide NiCd 2.4V Rechargeable battery pack
Industrial-grade reliability - Made from two Yuasa NiCd cells
Highest 700mAh capacity for long run-time before it needs recharging
Solder tags - Both at one end. Cells joined at other end.
42mm x 17mm 42mm long, 17mm diameter NiMH 1.2V Rechargeable battery by GP Batteries
Industrial-grade reliability from GP Batteries
Highest 2100mAh capacity for longest run-time before it needs recharging
Solder tags - Both ends
28mm x 17mm 28mm long, 17mm diameter NiMH 1.2V Rechargeable battery
High 1200mAh capacity for long run-time before it needs recharging
Normally fitted in pairs. Also see our pre-assembled twin pack 56mm x 17mm size
Solder tags - Both ends, 3mm wide
56mm x 17mm 2.4V Pack 56mm long, 17mm diameter NiMH 2.4V Rechargeable battery pack
Made from two single NiMH cells
High 1200mAh capacity for long run-time before it needs recharging
Solder tags - Both ends
43mm x 23mm 43mm long, 23mm diameter NiMH 1.2V Rechargeable battery
Industrial-grade reliability from GP Batteries
Genuine high 3300mAh capacity for long run-time before it needs recharging
Solder tags - Both ends, 5mm wide
It is strongly
recommended that you open up your shaver before ordering to double-check
the battery measurements because different sizes were fitted to different batches of the same model. You must be competent at soldering to fit this replacement and the fitted solder tags will need trimming to suit your electric shaver.
To open your shaver's casing you may require a screwdriver with a star-shaped tip. These are available through our
.
Our battery tags are carefully welded into place using specialist, instant resistance-welding machines for batteries. Do not attempt to solder anything directly onto untagged Ni-MH, Ni-Cd or Lithium batteries as the heat will cause internal damage to the battery. Unless otherwise specified, our batteries are fitted with extra-narrow, 3mm-width solder tags for maximum flexibility in fitting your shaver. Ni-Cd batteries are intended solely for permanent installation in personal & medical appliances.
Other Sizes
and see all the different specialist sizes and types of battery we offer.
Why Buy From Us?
We are an experienced British online business and long-standing eBay sellers. Take a look at our feedback! We are based in West Sussex and only supply genuine products from UK and other European distributors. Email enquiries are usually responded to within 1 working day and your order will be dispatched within 1-2 working days. We look forward to doing business with you!
Recycling
Please recycle your old battery at your local civic amenity or supermarket collection point.
Postage
We send orders to most countries worldwide. All orders are sent from the UK using Royal Mail services unless an alternative is arranged before ordering.
This listing text and all images are copyright © Ionic Industries. Reproduction without permission is prohibited. Please read the full description of these replacement electric shaver, beard trimmer and hair clipper batteries. Different models of rechargeable shaver, trimmer and clippers are fitted with different sizes and types of battery. . .
You are looking at our range of rechargeable batteries and battery packs to fit various Braun, Philips Philishave, Norelco, Panasonic, Wahl, Remington and other manufacturers' electric shavers, clippers and trimmers.
The side-by-side battery packs are permanently glued together then joined electrically across one end with a metal connector strip as shown below:
Correct polarity (+/-) must be observed. The solder tags on the side-by-side packs can be folded back on themselves to stick out in the opposite direction to maintain correct polarity if required for your shaver.
Please see below for a description of each battery. 42mm x 10mm NiMH
It is strongly
recommended that you open up your shaver before ordering to double-check
the battery measurements because different sizes were fitted to different batches of the same model. You must be competent at soldering to fit this replacement and the fitted solder tags will need trimming to suit your electric shaver.
To open your shaver's casing you may require a screwdriver with a star-shaped tip. These are available through our
.
Our battery tags are carefully welded into place using specialist, instant resistance-welding machines for batteries. Do not attempt to solder anything directly onto untagged Ni-MH, Ni-Cd or Lithium batteries as the heat will cause internal damage to the battery. Unless otherwise specified, our batteries are fitted with extra-narrow, 3mm-width solder tags for maximum flexibility in fitting your shaver. Ni-Cd batteries are intended solely for permanent installation in personal & medical appliances.
Other Sizes
and see all the different specialist sizes and types of battery we offer.
Why Buy From Us?
We are an experienced British online business and long-standing eBay sellers. Take a look at our feedback! We are based in West Sussex and only supply genuine products from UK and other European distributors. Email enquiries are usually responded to within 1 working day and your order will be dispatched within 1-2 working days. We look forward to doing business with you!
Recycling
Please recycle your old battery at your local civic amenity or supermarket collection point.
Postage
We send orders to most countries worldwide. All orders are sent from the UK using Royal Mail services unless an alternative is arranged before ordering.
This listing text and all images are copyright © Ionic Industries. Reproduction without permission is prohibited. Please read the full description of these replacement electric shaver, beard trimmer and hair clipper batteries. Different models of rechargeable shaver, trimmer and clippers are fitted with different sizes and types of battery. . .
Returns Accepted for this item if it's within 30 days
Price type
IN STOCK
OUT STOCK
.
